BFMQS - DYNALOY 1931, PART A
- MSDS: BFMQS
- Manufacturer: DYNALOY INC
- Product Name: DYNALOY 1931, PART A
- National Stock Number: 8040-00-728-2887
Product Identification
Product ID:DYNALOY 1931, PART A
MSDS Date:01/01/1987
FSC:8040
NIIN:00-728-2887
Kit Part:Y
MSDS Number: BFMQS
Responsible Party
Emergency Phone: 201 - 887-9270
Cage: HO162
Contractor
Telephone: 317-788-9925;703-527-3887
Cage: 27908
Ingredients
EPOXY RESIN, CAS#25068-38-6 ,(RANGE 30-40%)
CAS: 25068-38-6
RTECS: KC2100000
Fraction By Weight: 35%
EXPOXY DILUENT
Fraction By Weight: 5%
SILVER CAS#7440-22-4, RANGE 65-70%
RTECS: VU3500000
Fraction By Weight: 67.5%
MFR. NOTES THAT THIS PART HAS <8PPM EPICHLOROHYDRIN
RTECS: 9999999ZZ
Hazards
Effects of Overexposure:SKIN/EYES: MAY CAUSE IRRITATION, AND
SENSITIZATION AFTER KREPEATED CONTACT.
First Aid
First Aid:SKIN:WASH IMMEDIATELY WITH SOAP & WATER,EYES: FLUSH W/WATER
FOR 15 MINUTES, SEEK MEDICAL ATTN. IMMEDIATELY.
Fire Fighting
Flash Point:>200F/>93.3
Extinguishing Media:FOAM, CO*2, DRY CHEMICAL, WATER SPRAY
Fire Fighting Procedures:USE WATER TO COOL FIRE EXPSD CONTRS; WEAR
SCBA,PROTECT.CLTHG
Unusual Fire/Explosion Hazard:MFR. REPORTS "NONE"
Accidental Release
Spill Release Procedures:WEAR APPROPRIATE PROTECTIVE CLOTHING; ABSORB
WITH INERT MATERIAL (E.G.; SAND, VERMICULITE, ETC.), AND PUT IN AN
APPROVED DISPOSAL CONTAINER.
Handling
Handling and Storage Precautions:PRACTICE GOOD CAUTDON & PERSONAL
CLEANLINESS TO AVOID SKIN & EYE CONTACT. AVOID BREATHING VAPORS OF
HEATED MATERIAL.
Other Precautions:THOROUGHLY LAUNDER CONTAMINATED CLOTHING BEFORE
REUSING.
Exposure Controls
Respiratory Protection:NIOSH APPRVD ORGANIC VAPOR RESPIRATOR WITH
INADEQUATE VENTILATION
Ventilation:LOCAL EXHAUST OR GEN.MECH. VENTILATION TO MAINTAIN
CONC.
Eye Protection:SAFETY GLASSES
Other Protective Equipment:SAFETY SHOWER, EYE BATH & WORK APRON
Supplemental Safety and Health
MSDS DATE:UNDATED
Chemical Properties
HCC:N1
Boiling Pt:B.P. Text:>200F/>
Vapor Density:71
Appearance and Odor:SILVER PASTE LIKE MATERIAL
Stability
Stability Indicator/Materials to Avoid:YES
STRONG ACIDS, BASES, AMINES, MERCAPTANS
Stability Condition to Avoid:HIGH TEMPERATURES
Hazardous Decomposition Products:CO, CO*2, OXIDES O NITROGENS
Conditions to Avoid Polymerization:EXCESS HEAT
Disposal
Waste Disposal Methods:INCINERATE IN FURNACE OR BURY IN AN APPROVED
LANDFILL IAW FEDERAL,STATE, & LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.